Zig Bee Based Monitoring System for Electrical Machines
K. Fathima1, K. Shanmugavalli2
1K. Fathima, Electrical and Electronics Engineering, Vel Tech, Chennai, India.
2K. Shanmugavalli, Electrical and Electronics Engineering Vel Tech, Chennai, India.
Manuscript received on December 11, 2013. | Revised Manuscript received on December 15, 2013. | Manuscript published on December 25, 2013. | PP:7-9 | Volume-2 Issue-2, December 2013. | Retrieval Number: B0588122213/2013©BEIESP
Open Access | Ethics and Policies | Cite
© The Authors. Published By: Blue Eyes Intelligence Engineering and Sciences Publication (BEIESP). This is an open access article under the CC BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/4.0/)
Abstract: Electrical machines plays an important role, the use of medium-sized electric machines burned every year around about 16%. In addition, because of electrical failure, damage caused by accident’s even at home appliances as well as factory production cause the indirect economic losses even more greater. Detailed analysis of motor operation and fault conditions due to over voltage, load, etc can be solved by the usage of the current performance of microcontroller, zigbee and sensors embedded –to analyze the general motor protection devices, by improving the software to hardware to achieve best utilization of the machines. The normal conditions are to be stored in the database when the results occur abnormal the differences between the values are to be calculated accurately and the fault occurrences are rectified itself.
Keywords: Zigbee, sensors, monitoring system